Recessed LED Floor Light – Suits All Locations Including Bathrooms

Description

If you are pushed for budget you might consider using exterior decking lights in your bathrooms, but if you want professional designed-for-purpose lighting, you should consider this range of recessed lights. Finished in either 316 marine-grade stainless steel or polished chrome and offered in round and square designs these lights are going to give you the very best effect and last a long long time.

In all designs a single, low-wattage, low-heat, low-voltage, 1 watt LED chip provides warm white (3000°k) light and has a wide beam distribution of 120°. The fixture projects only 1.3mm from the floor so does not present a trip hazard yet is strong enough for foot traffic. 

Rated at IP65 this fixture can be used in Zone 1 and 2 in a bathroom – pretty much anywhere excluding locations in the bath or shower tray. 

The standard version gives an omni-directional light distribution. If you wish to use this to uplight a wall, or a bathtub without producing glare you may wish to use the asymmetrical version that has a blinker that greatly reduces the light output in one direction.

The fixtures must be connected to a 350ma DC power supply. Fixture may be installed on their own driver or several can be installed on a larger power supply and wired in series (see graphic). The smaller drivers listed below is smaller enough to fit through the hole made for the light fixture – see images.

We suggest a hole between 35 and 38mm is used for a snug fit. In the event of premature failure, the lights can be easily removed for replacement – you do not have to break up the floor.

The fixture depth is 12mm but we suggest a 20mm depth to accommodate the wiring.

NB These lights require a 3-volt 350mA supply and must be wired in series when connecting two or more to higher capacity drivers – failing to do so will overvolt and destroy the LED. 

Please ensure you order the correct driver for the appropriate number of fittings – Listed below.